Jeff Bridgman Antique Flags
Sold Flags



  13 STARS ARRANGED IN A 3-2-3-2-3 PATTERN ON A SMALL-SCALE FLAG OF THE 1890's-1920's ERA WITH AN ELONGATED PROFILE, SIGNED "FLACK"

Available: Sold
Frame Size (H x L): 34" x 52.5"
Flag Size (H x L): 23.25" x 41"
Description....:
13 STARS ARRANGED IN A 3-2-3-2-3 PATTERN ON A SMALL-SCALE FLAG OF THE 1890's-1920's ERA WITH AN ELONGATED PROFILE, SIGNED "FLACK":

13 star flag of the type made from roughly the last decade of the 19th century through the first quarter of the 20th century. The stars are arranged in lineal rows of 3-2-3-2-3, which is the most often seen pattern in 13 star flags of the late 19th and early 20th centuries. In most cases the 3-2-3-2-3 design can also be viewed as a diamond of stars, with a star in each corner and a star in the very center and this is no exception, save for the fact that the diamond has been stood on end. It can also be interpreted as a combination of the crosses of St. Andrew and St. George, which some experts feel could have been the design of the very first American flag, serving as a link between this star pattern and the British Union Jack. The pattern is often attributed--erroneously in my opinion--to New Jersey Senator Francis Hopkinson, a member of the Second Continental Congress and signer of the Declaration of Independence, who is credited with having played the most significant role in the original design of the American national flag. Hopkinson's original drawings for the design of the flag have not survived and his other depictions of 13 star arrangements for other devices are not consistent.

Why 13 Stars?
As the number of stars grew with the addition of new states, it became more and more difficult to fit the full complement of stars on a small flag. The stars would, by necessity, have to become smaller, which made it more and more difficult to view them from a distance as individual objects. The fear was that too many stars would become one white mass and distort the ability to identify American ships on the open seas.

The U.S. Navy used 13 stars on its small-scale flags for precisely this reason. This was, of course, the original number of stars on the first American national flag, by way of the First Flag Act of 1777, and equal to the number of original colonies that became states.

For all practical purposes, commercial flag-makers simply didn't produce flags with pieced-and-sewn construction that were 3 to 4 feet in length before the 1890's. There are exceptions to this rule, but until this time, the smallest sewn flags were approximately 6 feet on the fly. The primary use had long been more utilitarian than decorative, and flags needed to be large to be effective as signals. But private use grew with the passage of time, which led to the need for long-term use flags of more manageable scale.

Beginning around 1890, flag-makers began to produce small flags for the first time in large quantities. Most measured approximately 2 x 3 feet, or 2.5 x 4 feet, though there was certainly variation. This particular flag measures just over 2 feet on the hoist and 3.5 feet on the fly and is thus slightly more elongated than some others of the period.

Applying the same logic as the U.S. Navy, flag-makers chose the 13 star count rather than the full complement of stars for sake of ease and visibility. Any flag that has previously been official, remains so according to the flag acts, so 13 star flags were and still are official today.

13 star flags have been used throughout our nation's history for a variety of purposes. In addition to their use on the small scale flags of the 1890-1920's era, the U.S. Navy used the 13 star count on small boats, both in the 18th century and through most or all of the 19th century, particularly the second half. The Navy’s use of the 13 star flag ended in 1916 following an executive order written by President Woodrow Wilson. Among other uses, 13 star flags were carried by soldiers during the Mexican and Civil Wars, used at patriotic events, including Lafayette’s visit in 1825-26, celebration of the nation’s centennial in 1876 and the sesquicentennial in 1926.

Construction: The canton and stripes of the flag are made of wool bunting that has been pieced with treadle stitching. The stars are made of cotton and double-appliquéd (applied to both sides) with a zigzag machine stitch. There is a twill cotton binding along the hoist with two brass grommets, along which a red inked stamp or stencil was used to apply "2 x 3 1/2" to indicate size in feet. The same mark was applied by hand in pencil, along with the name "J.R. Frack" [sic - possibly "Flack"]. Also included is another penciled inscription with the initials "JRT" over "125-". The name and initials perhaps indicate the name of a former owner, as it was common to mark flags in this fashion during the 19th century. It appears that the inscription may have even been applied by the flag-maker or perhaps the seller, as opposed to by the owner, along with the price that he was charged to acquire it.

  Mounting: The flag has been hand-stitched to 100% silk organza for support on every seam and throughout the star field. The flag was then hand-stitched to a background of 100% cotton twill, black in color, which was washed to reduce excess dye. An acid-free agent was added to the wash to further set the dye and the fabric was heat-treated for the same purpose. The mount was then placed in a black-painted, hand-gilded and distressed Italian molding. The glazing is U.V. protective plexiglass.

Condition: There are a couple of pinprick-sized holes and very minor staining. Overall condition is outstanding.
Collector Level: Intermediate-Level Collectors and Special Gifts
Flag Type: Sewn flag
Star Count: 13
Earliest Date of Origin: 1895
Latest Date of Origin: 1926
State/Affiliation: 13 Original Colonies
War Association:
Price: SOLD
 

Views: 2712